Intended for packaging any loose and dusty products as cereals, animal feed, pellets, pasta, grain, building mixes, sawdust, zeolites, washing powder, fertilizers, soil and cat litter. Works on all types of heat-sealed films.
This is a machine for packing products in large bags - from 3 to 25 liters. The width of the film can be set from 600 to 1100 mm.
Productivity depending on the film is from 20 to 40 packages per minute.
The machine is equipped with additional nodes depending on the customer's tasks. You choose only the components that are needed for packaging your products.
Candied fruits and dried fruits
TEA and HERBS
Types of package
If necessary, the machine can be reconfigured for other products: the length of the package is set from the digital operator, and the package width change can be made by changing the forming node.
Easy-to-manage. Anyone can operate the machine, there is no need to have a technical education or special skills. The operator controls the operation of the machine, adjusts the hardware components, enters and saves the settings using the Japanese OMRON touch-screen switch.
It is configured for a specific product. Additional nodes for creating finished packaging:
For dusting products
For the “Gusset” type packages formation
Flat bottom forming device
Date print on the package
Thermal transfer printer
To pack products in color patterned films
Eye mark sensors
To print barcodes and information on the package
Laser programmable printer
To change the width of the package
Additional formative node
Automation features. The production of packages can be fully automated to produce more packages or reduce the staff to one or two people. In this regard, the machine is connected to the feeding and diverting conveyors:
● feeding belt conveyor automatically delivers the product to the packaging complex,
● diverting conveyor moves the finished packages to the sorting table or the next packaging machine.
If you want to produce a new bulk product, you will not need to look for another packaging machine. It is enough to change additional nodes and set new packaging parameters in the control panel.
Operating principle. The film is pulled out of the roll through the belt gear, after which the forming tube gives it a cylindrical shape. The product from the dosing machine enters the film, and the drive mechanism of the welding units welds and cuts off the finished package.
One cycle — one product package. The correct sequence of steps is monitored by the cycle sensor and software.
All equipment is fully electro-mechanical, without the use of pneumatic systems, so there is no need to spend money on the compressor. Equipment controller is Japanese DELTA programmable logic controller.
|Productivity, pack /min||up to 12|
|Packing material||polyethylene, polypropylene, combination|
|Film thickness, microns||from 80 to 160|
|The maximum width of the film roll, mm||up to 850|
|Minimum film roll width, mm||600|
|Diameter of a roll of a film, mm, no more||350|
|Weight of a roll, kg, no more||50|
|Length||from 250 to 850|
|Width||from 200 to 380|
|Number of memorized programs, pcs||30|
|Film unwinding drive||Asynchronous gear motor|
|Film drive||Asynchronous gear motor|
|Longitudinal welding drive||Pneumatic cylinder|
|Transverse welding drive||Pneumatic cylinder|
|Supply voltage||380 V, 50 Hz|
|Power consumption kW||1,6|
|Air consumption, liter / min.||9.3 per cycle|
|Air pressure, Mpa||0,6|
|Noise level, dB, no more||80|
|Type of photoelectric positioner||optical encoder|
|Type of dispenser||any|
|Type of device for printing||thermal, thermal transfer|
|Body material||structural steel|
|Contact surface material||Food approved materials|
|Overall dimensions, mm||1260x(1600/2215)x2335|
|Weight, kg||up to 750|